Variable Frequency Inverter, 7.5/11kw, 440V, 3-Phase

Variable Frequency Inverter, 7.5/11kw, 440V, 3-Phase

৳22,000.00
Stock: Out Of Stock
Ex Tax: ৳22,000.00
Brand:Unimat
Model: FA200-7.5G/11P-T4
Product Code: BAT-9033
+

Description of this Product:                      

In the industrial automation in the sector, there is a need for variable Frequency Inverter, 7.5/11kW, 440V, 3-Phase to control the speed of the motor. The Variable Frequency Inverter, 7.5/kW, 440V, 3-Phase change the speed of a motor by changing some parameters. These parameters are frequency and supplied voltage to the used motor. By changing the frequency and supply voltage of a motor, the Variable Frequency Inverter, 7.5/11kW, 440v, 3-Phase can run the motor slowly or speedy.

Consider, power supplied to an AC The motor is 50 Hz, then the motor will run at its rated speed. If the frequency increases by about more than 50 Hz, the motor will run faster than its rated speed. If the frequency reduces to 50 Hz, the motor will run slower than at its rated speed.

The Variable Frequency Inverter, 7.5/11kW, 440V, 3-Phase is not much expensive to use in industry or factory. This Variable Frequency Inverter is a high-frequency variable drive. There is a communication port, that is RS485 enabled. The Variable Frequency Inverter consists of the Input/Output module, where are rated current, input voltage, input frequency, output voltage, output frequency, and overload capacity.

Control Panel:

The Variable Frequency Inverter, 7.5/11kW, 440V, 3-Phase has a control feature. This control panel consists of control mode, communication port, speed regulation, starting torque, speed control accuracy, frequency precision, frequency resolution, torque boost, interior PID controller, automatic energy save running, automatic voltage regulation, and automatic current limiting, etc.

Specification for this Product:

Parameter

Value

Rated Current

25A

Input Voltage

3-Phase 440V

Input Frequency

50Hz/60Hz

Output Voltage

3 phase AC 0~input voltage

Output Frequency

0.00~400.00Hz

Capacity

7.5kW/11kW

Over Load Capacity

150% of rated current for 1 minute, 180% of rated current for 3 seconds

Control Mode

V/F control; Sensorless vector control

Communication Port

RS485

Speed Regulation

1:100

Start Torque

150% at 1 Hz

Speed Control Accuracy

≤±0.5% of rating synchronous speed

Frequency Precision

Digital setting: max frequency x± 0.01%; 
Analog setting: max frequency x± 0.2%

Frequency Resolution

Analog setting: 0.1% of max frequency; 
Digital setting: 0.01Hz

Torque Boost

Manual torque boost 0.1%~30.0%

Interior PID Controller

Be compatible to make a closed-loop system

Automatic Energy Save

Optimize V/F curve automatically based on the load to realize the power save running

Automatic Voltage Regulation (AVR)

Can keep constant output

Automatic Current Limiting

Limit running current automatically to avoid frequent over-current which will cause a trip

Enclosure Rating

IP 20

Temperature

–10~ +40; VFD will be derated if ambient temperature exceeds 40; each rise 1, the debate will be 5%

Humidity

5%-95%, without condensation

Altitude

≤1000m; VFD will be derated if above 1000m

Oscillation

Normal running:<5.9m/s2 (0.6g); Transportation:<15m/s2 (1.5g)

Store Environment

–20~ +60; no dust, no corrosive gas, no direct sunlight

Item Condition:  New

Warranty:  12 Months


Write a review

Note: HTML is not translated!

Rating Bad           Good